Portal milling machine – Double Column Milling M/C - Gantry Type TRIMILL VF3016

Produkt plats

Tillverkare

Beskrivning

x-travel 3.000 mm
y-travel 1.600 mm
z-travel 1.200 mm
control HEIDENHAIN iTNC530 HSCI
B-axis (swivelling head) + / - 100 ?
C-axis (milling head rotation axis) + / - 240 ?
feed and rapid traverse :
Rapid traverse B- and C-Axis 50 rpm
rapid feed Y,X,Z 40.000 m / min
Accelerations (X, Y and Z) 4 m / s?
Machine table: :
Clamping surface 3.500 x 1.750 mm
T-slots 27 x 22 mm H12
T-slot - distance 125 mm
max. workpiece load 7.000 kg / m2
Max. distance table to spindle nose 1.356 mm
2-Axis Fork Milling Head T21C
turning speed range: 10- 24.000 min-1
Drive power (S1 / S6): 42 / 50 KW
Torque (S1 / S6): 67 / 84 Nm
Tool bore HSK-A 63
tool magazin: :
number of tools 50
tool holder DIN 69873 HSK A63
Max. ? tool 115 mm
max. tool-? adjacent slots free 125 mm
max. tool length 300 mm
max. tool weight 12 kg
coolant equipment :
tank capacity 1.400 l
connected load
voltage 3x 40 V 50 Hz
power requirement 90 kVA
Required air-pressure min 6 bar
Nominal fuse protection 160 A
measurement, weight :
weight of the machine ca. 58.000 kg
Machine main dimensions 8,6 x 5,9 x 5,2 m
dimensions of the machine ca. m
total power requirement kW
weight of the machine ca. t
Equipment / Accessories
? 5-axis vertical portal milling machine in Gantry design.
? Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63
? Manually operated textile roof
? Tool changer chain 50-fold, change orientation vertical
? 3D probe for workpiece measurement
? Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process.
Alarm triggering, feed rate reduction or machine stop are carried out via the control system
? HEIDENHAIN HR550 handwheel (wireless)
? BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used
? Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS)
? TRIMILL Kinematics - application for rotary axes
? TRIMILL Teleservice - remote support
? Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm
? Hydraulic power unit
? 1 lubrication unit for the machine
? 1 lubrication unit for the milling spindle
? 1 cooling unit for cooling the milling head
? 1 cooling unit for cooling the axis motors
? 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m?. Extraction capacity 2.000 m? / h
? 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm
program hours on the machine: approx. 8.000h
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition

Byggår

Maskin under ström