Label printing machine – MARK ANDY P5 - 8-color (430)

Beskrivning

MARK ANDY P5 – 430mm (8-colour)
• Age: 2017
• 8 Colour (Flexo)
• Unwind
• Rewind
• ProLed System and Dryer
• Die Cutting
• BST Powerscope 5000 Inspectionsystem
• Sheetingstation (Cross)
• Delam / Relam
• Cross cutting device
• 1 delivery belt
• Mark Andy VPM 400 Panel Mount Machine
• Meech web cleaning - double sided
• 2 PitStop trolleys to hold printing cylinder ink trays
• Impression and magnetic cylinders
• 48 impression cylinders
• 7 magnetic cylinders
• 2 ink trays with non-stick coating
• Servo-controlled feed unit with closed control loop
• 1 single-sided unwind for roll diameters up to 40 inches (1016mm),
• Vertical dancer system, web edge control, closed control loop
• 1 ultrasonic web edge control with 2 sensors
• 1 ultrasonic web break control
• Printing unit:
• Print and process maximum width 17 inches 431.8 mm
• Maximum web width 17.25 inches 438.2 mm
• Min. print processing width 8.5 in 216 mm
• Min. print processing width with SK material 6.5 in 165 mm
• Minimum print length 5.5 in. 139.7 mm
• Maximum print length 24 inches 609.6 mm
• Minimum die-cut length 10 in. 254 mm
• Maximum die cut length 24 inches 609.6 mm
• Tolerances print / print / die cut + - 0,1mm
• Material Paper and adhesive laminate, PE, PET with liner, 25 to 356 micron
• Maximum mechanical speed 230m / min. The production speed to be production speed depends on the printing and die-cutting form and the output of the UV system
• Connection 415 Volt, 50 Hz system
• Operating instructions in German
• Toothing flexo printing unit 1 / 8 inch helical toothing
• Punching station 1 / 8 inch straight toothing
• Cross cutting station 1 / 8 inch straight toothing
• This machine is equipped with a remote diagnostic system. To operate this system an internet connection must be provided to operate this system.

Condition

Byggår

Maskin under ström