Iron workers – Section Steel Shear GEKA Semipaxy 1000x400 mm B+R 15"

Produkt plats

Tillverkare

Beskrivning

neu
ca. 10 Wochen ab Auftrags
Spanien
24100 ?
494.05 ?
1000 mm
400 mm
12 m / min
0,2 mm
0,1 mm
300 kg
The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat.
THE ASSEMBLY CONSISTS OF:
* Mounting plate.
* Table assembly with ?X? and ?Y? axis driven by servo motors.
* B+amp;R Power Panel 500 PC based 15? touch screen control
* Each axis ?X? and ?Y? has servo motors with built encoder for precise measurement.
* Electric cabinet
THE WORK PROCESS IS AS FOLLOWS:
* The position of the holes to be punched is programmed either in absolute or incremental dimensions.
* When the control is started up, the guide stops are positioned for first hole.
* The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles.
* After the punch has returned to the pre-set clearance height, the table guide stops move to the next programmed position.
* Repeat this sequence until all holes are punched.
B+amp;R PC BASED 15? TOUCH SCREEN CONTROL MAIN FEATURES:
*
* B+amp;R Power Panel 500
* Integrated keyboard
* Windows embedded operating system
* 15? colour touch screen WXGA resolution
* Compact Flash Memory.
* USB front port
* Ethernet port
* Easy and user friendly interface
* Programming is made through Line Pro software developed by Geka
* Importing of dxf / dstv files
* Network connectivity
* Remote assistance via the internet
* Run, design, jog, configuration and alarm modes
ELECTRIC CABINET
* Electric cabinet containing power and control equipment for the axis positioning and control of the machine
* Includes Allen-Bradley Guarmaster? safety relays
* Electric cabinet is mounted inside Hydracrop?s or Puma?s frame. If machine is retrofitted, the electric cabinet is mounted out of the machine?s frame.
* Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know
LINE PRO MAIN FEATURES:
* It is a visual and a very easy to use application with graphic representations.
* It shows the operator the image of the piece that is being designed.
* All the process of the part (from designing to manufacturing) can be done and controlled directly from the Positioning Control.
* Importing of dxf and dstv files available according to designing
specifications of the software.
* It is easier to make changes on holes that have been already designed and the operator can easily identify any mistake on the part; as he is watching physically on the screen all the steps of the process of manufacturing of the part.
* Line Pro can be installed in a PC for later on sending the file via the network
or with a USB stick to the machine
*
Other X- and Y- ranges are also available, please ask for an offer.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Condition

Maskin under ström