Begagnade maskiner: Plastbearbetningsmaskiner

Catalog No. : 7423
Type: ES 200/50 HL ST
Producer: Engel
Made in: 1998
Characteristic:
Clamping force: 50 t
Plate dimensions: 510x320 mm
Weight of ...

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A.
Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: ...

Catalog No. : 7418
Type: Concept 420/810-2300
Producer: Demag
Made in: 2006
Characteristic:
Clamping force: 420 t
Screw diameter: 60 mm
Injection ...

Catalog No. : 7416
Type: LXJ-2030
Producer: UNICH
Made in: 2014
Characteristic:
Laser power: 2x130 W
Length of the working table: 3000 mm
Width of ...

2021 AEB engineering, water demineralization system which has run less than 10 hours and is not used since then.

1) Be sure you have an Appropriate Area for the size of the machine

KrausMaffei (KM200-700 C1) Injection molding machine

Technical data

Injection moulding machine KM 200-700 C1
Machine number 61007782
Year of construction 2006

Injection molding machine ( machine is in production and can be viewed if there is demonstrable interest.
Wittmann Battenfeld Eco Power 110/350, with Unilog B 6 control;
Year of ...

Injection molding machine KraussMaffai KM 1300-14700;
Year of manufacture 1998;
Machine complete and intact.
Including Händling PSA 2080 (PSA = formerly Peter Suling Automation, now ...

Weight: 200kg, an inspection is possible.

Ref.Nr.: INNO26577

Platen dimensions: 1700x1250mm, with documentation, an inspection is possible.

Ref.Nr.: INNO26498

mold cleaning for plastic injection molding, extrusion, elastomers, die casting, core boxes, molds; well-kept facility, was hardly in use

Technical data:
ultrasonic power: 8,4 kW

Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.

Ref.Nr.: INNO26494

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site ...

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- ...

Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.

Ref.Nr.: INNO26372

Screw diameter: 30mm, connected load: 42kW, operational hours counter pump/ automatic: 73,384/ 64,491h, with control software version 3.080, an on-site inspection is possible.

Ref.Nr.: ...

warehouse no.: 503418
manufacturer: ARBURG
type: Allrounder 630 S 2500-1300
controller: ECO SELOGICA
year of construction: 2006

technical data clamping ...

warehouse no.: 503419
manufacturer: ARBURG
type: Allrounder 370C 800-250
controller: Selogica
year of construction: 2005

technical data clamping unit

There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: ...

Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.

Ref.Nr.: INNO26352

Operational hours counter: 62,699h, with documentation, without accessories.

Ref.Nr.: INNO26338

Operational hours counter: 85,318h, with documentation, without accessories.

Ref.Nr.: INNO26337

Clamping force: 500kN, heating output: 9.4kW, connected load: 24.5kW, weight: 3.5t, operational hours counter: 68,747h, with documentation, without accessories.

Ref.Nr.: INNO26336

Connected load: 86kW, operational hours counter: 58,952h, with documentation, without accessories.

Ref.Nr.: INNO26335

Connected load: 51kW, operational hours counter: 72.552h, with documentation, without accessories.

Ref.Nr.: INNO26334

Clamping force: 250kN, heating output: 2.7kW, connected load: 69kW, operational hours counter: 97,696h, with documentation, without accessories, the hydraulic control valve is defective on the closing ...

Clamping force: 250kN, heating output: 4.2kW, connected load: 15.2kW, weight: 2.1t, operational hours counter: 72.811h, with documentation, without accessories.

Ref.Nr.: INNO26331

Catalog No. : 7235
Type: 6.5
Producer: Weber
Made in:
Characteristic:
Equipment:
Calibration table
Tow belt

Arburg 570 C 2K plastic injection molding machine

Here are the technical details of the machine
Manufacturer: Arburg
Model: 570 C 2K
Year of manufacture: 2000

Leapfrog Bolt Pro - industrial desktop 3D printer with
two print heads for sale.

The printer has approx. 1000 operating hours and has been checked and serviced annually by a ...

Pallmann mill/granulator for sale
Model: PS4-5 F
Year built: 1973
Number of rotations: Rotor 640

Find more here - https://www.ucymachines.com/

Contact us at ...

SPR059

PLASTIC INJECTION MOULDING MACHINE second-hand

manufacturer ENGEL, type Insert 200H/70

Construction: Rotary table

Clamping force: 70 ...

Brand: Farmet
Model: FE500
Condition: Used

Extruder for soya, cereals and waste products for animal feed production.
Extruder was used very little.

Find ...

Injection molding machine
Arburg Allrounder 320
Version 750 – 90/90
2K machine, with 2nd horizontal injection unit
Year of construction 1997
Operating hours: 30690 h

1988 Argurg 220-90-350-D, injection molding machine.

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com
[TABELLE]Manufacturer ...

Extruder with flat die, , Piovan feeder, polishing unit, haul-off, winder, platform scale, cooling system and tempering equipment

Find more here - https://www.ucymachines.com/
...

Injection moulding machine for sale.
The plant was used until recently.

Technical data
Manufacturer: Ferromatik Milacron
Type: K85D-S/2F
Year of manufacture: ...

Engel duo 7050H/7050M/1100 combi M for sale.
Year 2016.
Injection moulding machine equipped with 2 receiving robots and Zebra automatic label printer.
Very good condition, minor ...

BDplast filter, which worked only 6 months. Has been changed it because the extruder was replaced.

It is BDplast of 305mm diameter.

We produce 1300kgs per hour.

1998 KRAUSS MAFFEI KM 110-320 CZ + ROBOT (optional)

Injection capacity (g) 142
Max. Injection pressure (Bar) 2429
Max. Clamping force 110
(kNx10)

Min. Mould ...

The machinery are currently in use at our thermoplastic injection moulding department.

They could be available approximately in the second half of 2024

All machinery is ...

The machinery are currently in use at our thermoplastic injection moulding department.

They could be available approximately in the second half of 2024

All machinery is ...

The machinery are currently in use at our thermoplastic injection moulding department.
They could be available approximately in the second half of 2024

All machinery is ...

BCF 1 Line
SWISSTEX BCF MACHINE
YEAR: 2003
MONO
4 EXTRUDER
8 POSITIONS
10 TON/DAY

Find more here - https://www.ucymachines.com/

Contact us ...

Manufacturer KRAUSS MAFFEI
Type KM 200-700 C1

M. Year 2005

• Dimensions(LxWxH) 5600x1900x2200
• Weight 11000 kg

Injection molding machines are ...

Manufacturer KRAUSSMAFFEI
Type 420-1400 CX

M. Year 2013
• 1 injection unit
• Dimension(LxWxH) 6630x2600x2400
• Weight: 24000kg

Injection molding ...

Injection molding machine Good condition
Krauss Maffei
Typ: 90-210 B1

Operating hours: 32979 hrs

Find more here - https://www.ucymachines.com/
...

BCF 2 SWISSTEX BCF MACHINE 2007 MONO, 2 EXTRUDER 8 POSITION - 10 TON/DAY

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com
...

BCF 3 SWİSSTEX BCF MACHINE 2008 MONO, 2 EXTRUDER 8 POSITION - 10 TON/DAY

Find more here - https://www.ucymachines.com/

Contact us at - sales@ucymachines.com
...

Injection moulding machine incl. robot

Manufacturer Krauss Maffei
Model 650 – 2700 C1
Year 2001

Used Materials -
Final product Plastic injection