Begagnade maskiner: Plastbearbetningsmaskiner

This ARBURG Allrounder 630S 2500-800 injection moulding machine was manufactured in May 2016. It offers a robust 2750kN clamping force, with a hydraulic drive system and precise control features, ...

This injection moulding machine, manufactured in 1999, has a robust design, weighing 53 tons, with a closing force of 11000 Kn. It includes hydraulic closing, M24 clamping threads, an ENGEL robot for ...

This Krauss Maffei 1300/14700 MC Injection moulding machine was manufactured in the year 1998. It is equipped with a Siemens S7 control unit. The machine has a clamping force of 13000 kN and a screw ...

This HPM Hemscheid 2500-1400 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 2500 kN and a screw diameter of 63 mm.
General Data

This HPM Hemscheid 750-250 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 750 kN and a screw diameter of 36 mm.
General Data
Measurements ...

This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.
Main drive
Distance between bars: 1120 - ...

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.

Machine Benefits
Qualitative Machine Benefits:
- 2019 equipped ...

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

Machine Benefits
Technical Machine Benefits:
- Spraying tool
- 28mm ...

This BMB Ekw 70pi Hybrid Injection moulding machine was manufactured in the year 2015. It is equipped with a HEIDENHAIN control unit. The machine has a clamping force of 7000 kN and a screw diameter ...

This Battenfeld EcoPower180 Injection moulding machine was manufactured in the year 2012 and has less than 500 hours. It is equipped with a Battenfeld Unilog B6 control unit.
Control Unit

This Arburg Multilift H 720 - 3200 - 1300 Injection moulding machine was manufactured in the year 2005 in Poland and has 42878 production hours. It is equipped with an Arburg Selogica control unit. ...

Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. ...

This injection moulding machine was manufactured in 2000. The Negri Bossi 1500 boasts a closing strength of 15000 Kn and a screw diameter of 135 mm, optimized for precise performance. Key features ...

This injection moulding machine was manufactured in 2022. With a closing force of 15960 Kn and an opening stroke of 2500mm, the Italtech KS 1600/10800 offers precise control and ample space between ...

Clamping force: 2000kN, drive power: 37kW, injection volume: 377cm³, melt pressure: 1600bar. Screw diameter: 50mm, control: MC4 32-bit microprocessor control, nozzle type: R 15. Dimensions X/Y/Z: ...

This DEMAG Ergo-Tech 250-1450 injection moulding machine was manufactured in 1995. It comes equipped with handling capabilities, tailored for intricate and precise manufacturing processes. This ...

Injection molding machine: clamping force: 5000kN, opening stroke: 1109mm, max. mold weight per plate/total: 5300kg/10600kg, drying time: 4.15s. Injection units: Unit 1: screw diameter: 90mm, ...

This injection moulding machine, the ARBURG 420C-1000-250, was manufactured in 2001. It is designed to deliver consistent performance and reliability for various plastic manufacturing applications. ...

This ENGEL E Victory 740/160 injection moulding machine was manufactured in 2011, featuring advanced handling capabilities. Noteworthy for its efficiency and reliability, this machine is a staple for ...

This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production ...

This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. It's notable for its efficiency and ease of ...

This injection moulding machine, manufactured in 2000 by DEMAG, model Ergo-Tech 350 Concept, comes with handling technical specifications, making it a prime choice for efficient and reliable ...

This KRAUSS MAFFEI 150-700 C2 Injection moulding machine was manufactured in 2000 in Germany. This machine offers a clamping force of 1500 kN and features a mold mounting platen sized at 780 mm x 790 ...

For the storage and pre-treatment of two-component materials such as polysulphides or silicones etc. There are 3 Reinhardt Technik NF1 freezer available. Years of construction: 1) 2009/2) 2000/3) ...

Clamping force: 3500kN, injection unit: 1700, drive power: 75kW, control system: Graphtrack/DSP with trackball, plasticizing unit: HiMelt screw 70-220(1801bar,954cm³), mould height: 600mm-950mm. ...

This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for ...

This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding ...

This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, it's designed for precision and efficiency in production. Ideal for a wide range of plastic moulding ...

This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of ...

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced ...

This Battenfeld HM 2P 800-7700 Injection moulding machine was manufactured in 2003. This machine has an injection unit with a screw diameter of 120mm, specific injection pressure of 1361 bar, and a ...

Machine in very good condition (= photo)Operating hours 12`800hEquipment:- 4 temperature control points for hot runner- granulate dryer- conveyor belt- temperature control unit- Waste chipperMould ...

Mould clamping unit
locking force:   60 to
die opening stroke max.:   450 mm
mould height min.:   200 mm
mould height max.:   650 mm

max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: ...

Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.

warehouse no.: 503439
manufacturer: ENGEL
type: Victory 1050-220 TECH
controller: CC100
year of construction: 2006
operation hours: 92465 h

technical ...

screw size 30 mm
closing pressure 600 kN
total power requirement 70 kW
weight of the machine ca. t
dimensions of the machine ca. m
injection shot weight in Polysterol ...

This KRAUSS MAFFEI KM 65/80 CX Injection moulding machine was manufactured in 2010 in Germany. This machine is equipped with a hydraulic clamping unit with a clamping force of 650 kN. It has a tie bar ...

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke ...

Catalog No. : 7423
Type: ES 200/50 HL ST
Producer: Engel
Made in: 1998
Characteristic:
Clamping force: 50 t
Plate dimensions: 510x320 mm
Weight of ...

This ARBURG Allrounder 420S 1300-675 Injection Moulding Machine was manufactured in 2004 in Germany. It has a clamping force of 1300 kN and is equipped with a 55mm screw with 2080 bar injection ...

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is ...

Cooling capacity: 14.4kW, permissible min./max. temperature TS: +6°C - +20°C, refrigerant: R410A.
Chilled water temperature at inlet/outlet: 15°C/10°C, ambient temperature/air inlet: ...

This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.
Injection ...

This HAITIAN MA 3500 III Plus Injection moulding machine was manufactured in the year 2021 and offers a high clamping force of 3500 kN and precise control for efficient and reliable injection molding ...

This HAITIAN MA 3800 III Injection moulding machine was manufactured in the year 2021 and offers a high clamping force of 3800 tons and precise control for efficient and reliable injection molding ...

Catalog No. : 7418
Type: Concept 420/810-2300
Producer: Demag
Made in: 2006
Characteristic:
Clamping force: 420 t
Screw diameter: 60 mm
Injection ...

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm ...

Catalog No. : 7416
Type: LXJ-2030
Producer: UNICH
Made in: 2014
Characteristic:
Laser power: 2x130 W
Length of the working table: 3000 mm
Width of ...

2021 AEB engineering, water demineralization system which has run less than 10 hours and is not used since then.

1) Be sure you have an Appropriate Area for the size of the machine