Produkt plats | Austria |
Beskrivning | VO - series - the tension bending tube bending machines VOS and VOMS enable the roll bending of all common tube and hollow profile materials, largest possible bending angle 120°. The machines enable the bending of tubes and hollow profiles in the roll bending process, with and without bending mandrel. Depending on the material, tubes and hollow sections with a wall thickness of 0.8 mm to 4 mm can be bent with our VO machines, tube diameters of Ø 10 mm to 60 mm or up to Ø 80 mm (with the models VOS40 / VOMS140) can be bent, hollow sections with the dimensions square 20 x 20 mm to 50 x 50 mm and rectangular 35 x 20 mm to 60 x 30 mm can also be bent. A special feature of our VO models is that they can also be used for bending with very short bending legs. With the available mandrel bending device (with lengths of 2 m and 3 m available), even difficult bends can be carried out absolutely crease-free. |
Condition | Helt ny |
Maskin under ström | Ja |
CNC - Maschinentechnik
Hauptstraße 93
2384 Breitenfurt bei Wien
Kontaktperson: Wolfgang ECKER